Yamaha 180cc 200cc Complete Upgrade Kit / Big Valve Head

Discussion in 'For sale' started by haen, Nov 18, 2011.

  1. haen

    haen Member


    Hi Brothers and Sisters,
    Just want to offer my kit and big valve head

    1. Complete 180 cc FORGED PISTON CYLINDER KIT


    [​IMG]

    Kit contents :

    I. CYLINDER KIT

    1. Cyl head gasket
    2. Cyl block gasket
    3. Cyl block
    4. FORGED Piston 62 mm
    5. Piston ring
    6. Piston wrist pin 14 mm
    7. Circlip 2 pcs
    8. Power Cam 5.8 mm lift matched perfect with the bore

    [​IMG]

    Uploaded with ImageShack.us

    II. FUELING SYSTEM KIT

    1. 32 mm Throttle Body
    2. Intake Manifold
    3. 180 cc 10 - HOLE injector (better spray pattern than stock injector and larger capacity up to 200 cc upgrade)

    III. IGNITION KIT
    1. TCI Coil

    DYNOTEST RESULT :

    [​IMG]

    this test was taken before injector upgrade, after injector upgrade now resulting in 23.4 HP


    2. 200cc FULL SPEC KIT

    [​IMG]


    [​IMG]



    [​IMG]

    Uploaded with ImageShack.us




    DYNO TEST RESULT FOR THE 65 mm KIT FULL SPEC

    [​IMG]


    DYNO TEST RESULT FOR THE 66 mm FORGED PISTON KIT FULL SPEC - SPECIAL ORDER

    [​IMG]

    With both of these kit it's advisable to :

    1. Remove the thermostat (depends on average weather temp in your country)
    2. Adjust the CO level setting by Yamaha FI Diagnostic Tool at your nearest big Yamaha Service Center until you get good fueling (usually at -12 to -15) or normal grey clean / reddish plug color.
    3. Change the air filter to cone type (installed on the breather hose), airbox cover still installed.

    previous shipment to Austria and Denmark.. will post the UK shipment later.. FULL 180 cc COMPLETE UPGRADE KIT... cyl + pistons + kit + gaskets + protec tci coil + 32 mm throttle body + larger manifold + 10 hole injector + camshaft

    [​IMG]

    Uploaded with ImageShack.us

    more UK shipments..

    [​IMG]

    Finland shipment...

    [​IMG]


    2. BIG VALVE HEAD


    [​IMG]

    [​IMG]

    SuperFlo FlowBench result :

    [​IMG]

    Uploaded with ImageShack.us

    Items comes from Indonesia, accepts Paypal (verified address only), prefer Western Union / Wire Transfer for Asian countries buyer.
    The kits have been sold to various addresses in UK, Israel, Spain.

    PM me for pricing.

    YM ID : haentiara
    Blackberry PIN : PM me

    video test result 0-100 km/h on YZF R15 (without big valve cyl head, only 180 cc complete kit)

    https://www.facebook.com/photo.php?v=10151394096885497&set=t.1550053996&type=3&theater

    200 cc FZ150i with big valve head + 10 hole injector

     
  2. haen

    haen Member


    Cam looks :

    [​IMG]

    Still use DECOMP MECHANISM, easy starting... performance spec :)

    Big valve head intake porting :

    [​IMG]
     
  3. Jay-Ramirez

    Jay-Ramirez Member


    putting a price would help :)
     
  4. haen

    haen Member


    @Jay : sorry better via Private Messages :).. you can send me PM..
     
  5. Jay-Ramirez

    Jay-Ramirez Member


    Ahh i just read the pricing bit, no no, not for me, was just encouraging promotional tips :) Good luck!
     
  6. haen

    haen Member


    hahahah okay thanks for the tips.. Thanks Jay !
     
  7. Fisher

    Fisher Member


    If I had the cash, I would seriously consider it =/
     
    Killachipmunk likes this.
  8. haen

    haen Member


    @Mr. Fisher : thanks for visiting anyway :)
     
  9. Mayoh x2

    Mayoh x2 Member


    may go for sommet like yhis next year when i pass test not going illegal but im tied to my bike
     
  10. haen

    haen Member

  11. bikerboy

    bikerboy Member


    link dont work
     
  12. Jay-Ramirez

    Jay-Ramirez Member


    Link only shows one persons review which has only ever done 2 posts, in a nutshell, It easily could of been you to have posted that :) just saying
     
  13. haen

    haen Member


    @Jay : dude are you being skeptic or just negative ? why not ask the man himself ? His facebook profile is Anish Kamalasanan... you can ask and hear (or read) it by yourself... such a fool move if i wrote it for my self promotion.. or you can ask mr. Stephen Burnard in Yamaha Bermuda about me... total sales up more than USD 100,000 and BY BANK DIRECT TRANSFER...
     
  14. Mayoh x2

    Mayoh x2 Member


    so all people in a dif country whod do nefin for your money? thats reliable
     
  15. Jay-Ramirez

    Jay-Ramirez Member


    I'm sure I'm entitled to my opinion and that's it. Like I said, I'm just saying.
     
  16. haen

    haen Member


    @Jay : yah please keep it to yourself then if you're not interested since you begin to implying something here.. this is not a discussion thread.. if you want to say something please do it on another thread... if you want to ask about references or technical matters u are welcome to do so.. but questioning is something else
    @Mayoh : Meaning what ? i'm just giving references.. you can search on facebook and contact those person if u questioning our credibility.. that Mr. Burnard already does business with us since 2008 and we already do export performance parts for various bikes and containers of bikes from our country..
     
    MikasPT likes this.
  17. MikasPT

    MikasPT staff Staff Member


    Good Haen, you put 2 trouble makers in the correct place.
    keep in mind they will do anything to ruin this post 2.
     
    Pimy Khetil likes this.
  18. haen

    haen Member


    @Mikas : yeah, thanks my friend.. dunno why i keep stumbled upon this crap.. even on the other neighbour forum..
     
  19. Jay-Ramirez

    Jay-Ramirez Member


    trouble makers? really? since when? hardly.
    "keep in mind they will do anything to ruin this post"
    Please could you tell me where have you gathered evidence to approve you saying "they will do ANYTHING to ruin this post"
    pointless post mikas, im sure you "friend" here can stand up for himself.
     
  20. Alonso

    Alonso Member


    Mate, dont get so wound up over what Jay said, hes completly right! Its only one persons review, could be realted to (note that i said could) and obvi going to say a possitive review, aswell as only having made two posts previously so it could (not i said could so dont cry) be you. I think its a good way to advertise here, on a forum thats r125 specific, but your not doing you or your business any favours by argueing with people. Chill :)
     
RELATED TOPICS:

Share This Page